한국템씰㈜ > Temperature transmitters

> 제품소개(Product) > Temperature transmitters

Temperature transmitters

Multifunctional transmitters

I.S. interfaces

Signal isolators

Displays

Communication interface

CUSTOMER CENTER: 궁금하신 사항은 문의주세요.; 032-612-4020; FAX : 032-624-0792; E-mail : info@tempseals.co.kr

Temperature Transmitters, I.S. Interfaces

Temperature transmitters

:: 글답변 ::

이 름

패스워드

이메일

홈페이지

제 목

<ul>  
<li> * High accuracy, better than 0.05% of span</li>  
<li> * Slimline housing of 6 mm</li>  
<li> * Excellent EMC perforemance</li>  
<li> * Selectable 60 ms / 60 s response time</li>  
<li> * Pre-calibrated temperature ranges are selectable via DIP-switches</li></ul><br /><br />
<h3>Application</h3> 
<ul>  
<li> * The 3113 temperature converter measures a standard Pt100, TC J and K temperature sensors, and provides an isolated analog current and HART® signal output.</li>  
<li> * High 3 port isolation provides surge suppression and protects the control system from transients and noise.</li>  
<li> * The 3113 can be mounted in the safe area or in Zone 2 / Division 2 areas.</li>  
<li> * Approved for marine applications.</li></ul> <br /><br />
<h3>Technical characteristics</h3> 
<ul>  
<li> * Flexibly powered by 24 VDC (±30%) via power rail or connectors.</li>  
<li> * A 60 ms fast response time with simultaneous sensor error detection when selected.</li>  
<li> * Selectable internal/external CJC.</li>  
<li> * Excellent conversion accuracy in all available ranges, better than 0.05% of span.</li>  
<li> * Meeting the NAMUR NE21 recommendations, the 3113 provides top measurement performance in harsh EMC environments.</li>  
<li> * The device meets the NAMUR NE43 standard defining out of range and sensor error output values.</li>  
<li> * A visible green LED indicates operational status of the unit and the input sensor.</li>  
<li> * All terminals are protected against overvoltage and polarity error.</li>  
<li> * High galvanic isolation of 2.5 kVAC.</li>  
<li> * Excellent signal/noise ratio of > 60 dB.</li></ul> <br /><br />
<h3>Mounting / installation / programming</h3> 
<ul>  
<li> * Selectable HART® mode with HART® 7 revision protocol enables extended device programming.</li>  
<li> * Selectable DIP-mode for easy configuration of more than 1000 factory calibrated measurement ranges with HART® read only feature.</li>  
<li> * The narrow 6 mm housing allows up to 165 units to be mounted per meter of DIN rail, without any air gap between units.</li>  
<li> * Wide ambient temperature range of: -25...+70°C</li></ul>

링크 #1

링크 #2

파일첨부

왼쪽의 글자를 입력하세요.